Aquarea Heat PumpsHot-water Heat PumpsFan-coil UnitsSplit Air ConditionersMulti-split and Commercial Systems
Panasonic Aquarea heat-pump installation guide: For suitable models, installation steps, our projects and frequently asked questions, open the guide →
Panasonic Aquarea High Performance
High-efficiency Aquarea series for homes; generation L is an R290 hydro-split system producing flow temperatures up to 75 °C.
- L nesli R290
- 75 °C (L)
Aquarea High Performance
High Performance L
- Nesil
- L
- Type
- Hidro-split
- Refrigerant
- R290
- Output (single-phase)
- 5 / 7 / 9 kW
- Output (three-phase)
- –
- Min. outdoor temperature
- -25 °C
- Max. flow temperature
- 75 °C
Aquarea High Performance
High Performance K
- Nesil
- K
- Type
- Split
- Refrigerant
- R32
- Output (single-phase)
- 3 / 5 / 7 / 9 kW
- Output (three-phase)
- –
- Min. outdoor temperature
- -25 °C
- Max. flow temperature
- 60 °C
Aquarea High Performance
High Performance J
- Nesil
- J
- Type
- Split / monoblok
- Refrigerant
- R32
- Output (single-phase)
- 3 / 5 / 7 / 9 kW
- Output (three-phase)
- –
- Min. outdoor temperature
- -20 °C
- Max. flow temperature
- 60 °C
Aquarea High Performance
High Performance H
- Nesil
- H
- Type
- Split / monoblok
- Refrigerant
- R410A
- Output (single-phase)
- 12 / 16 kW
- Output (three-phase)
- 9 / 12 / 16 kW
- Min. outdoor temperature
- -20 °C
- Max. flow temperature
- 55 °C
Panasonic Aquarea T-CAP
T-CAP (Total Capacity) series maintaining nominal heating output even at low outdoor temperatures.
- Down to -28 °C
- Sabit kapasite
Aquarea T-CAP
T-CAP K
- Nesil
- K
- Type
- Split
- Refrigerant
- R32
- Output (single-phase)
- 9 / 12 kW
- Output (three-phase)
- 9 / 12 kW
- Min. outdoor temperature
- -28 °C
- Max. flow temperature
- 65 °C
Aquarea T-CAP
T-CAP J
- Nesil
- J
- Type
- Monoblok
- Refrigerant
- R32
- Output (single-phase)
- 9 / 12 kW
- Output (three-phase)
- 9 / 12 / 16 kW
- Min. outdoor temperature
- -20 °C
- Max. flow temperature
- 65 °C
Aquarea T-CAP
T-CAP H
- Nesil
- H
- Type
- Split
- Refrigerant
- R410A
- Output (single-phase)
- 9 / 12 kW
- Output (three-phase)
- 9 / 12 / 16 kW
- Min. outdoor temperature
- -28 °C
- Max. flow temperature
- 60 °C
Panasonic Aquarea EcoFleX
3-in-1 system combining heating, hot water and cooling through ducted air.
- Nesil
- J
- Type
- Split + kanal
- Output
- 8 kW
- Min. outdoor temperature
- -15 °C
- Max. flow temperature
- 55 °C
Aquarea EcoFleX
Aquarea EcoFleX 8 kW
Technical data compiled from the manufacturer’s Polish website (aircon.panasonic.eu/PL ↗). Models and specifications may vary by country and over time; the manufacturer’s current documentation is authoritative. HYDRATERM is an independent installer and service provider for Panasonic products and is not an official representative of the manufacturer.
Which model suits your building?
Let us determine the right equipment and capacity for your building and carry out installation, commissioning and maintenance.