heat pump systems

Energy-Efficient
Electric Heat Pump Installation

We plan the right system for your home with a free site survey, capacity calculation and certified installation. Within 24 hours, we prepare a proposal for a solution that can provide an average of 40–60% energy savings.

Free site survey & heat calculation Brand Warranty 2-year workmanship warranty Installation according to EU standards
38+
Completed Installations
12yrs+
Years of Experience
4
Countries of Operation
Calculate Free Capacity and Cost →

Brands within our service scope

Click a brand to view its products and systems

When Is a Heat Pump Needed?
If one of the following situations applies to you, a system analysis may be necessary.
Replacing an old boiler
For systems older than 10 years, it can significantly reduce energy costs. Old boiler = unnecessarily high bills.
High energy bills
If your monthly costs have increased, a system analysis should be carried out. Proper installation can provide 40–60% savings.
New home construction
The most efficient integration is done during the construction phase. Adding it later is both more expensive and more complex.
Independence from gas
For those who want to become independent from fluctuations in gas prices, an electric heat pump is a safe alternative.
Government subsidies
Active support programs for heat pump installations are available in Poland, Germany, Austria and Slovakia. We provide current information during the quotation stage.
Low-temperature systems
If you have underfloor heating or a low-temperature radiator system, the heat pump operates at maximum efficiency.
Benefits
A properly installed heat pump system provides long-term benefits in both comfort and economy.
40–60% Energy Savings
It significantly reduces heating costs compared with a gas boiler. COP value 3–5 — 1 kWh of electricity consumed produces 3–5 kWh of heat.
Full Compatibility with Underfloor Heating
It operates at low water temperatures (35–45°C). When used with underfloor heating, system efficiency reaches its maximum.
Both Heating and Cooling
Air-source heat pumps can provide cooling in summer and operate as a single system all year round.
Installation according to EU Standards
All installations are carried out legally and with documentation by our F-Gas Cat. I, G2 and G3 certified team.
Long Service Life & Low Maintenance
A correctly installed heat pump operates reliably for 15–20 years. Simple annual maintenance is sufficient.
Brand-Independent System Recommendation
We choose the right brand based on budget and needs analysis. We are not tied to any single brand.
6 Steps from Site Survey to Warranty
The same precision and the same standard in every project.
1
Site Survey Request
Fill out the form or write to us on WhatsApp — we respond within 24 hours.
2
Capacity Calculation
We inspect your building on site and calculate heat loss and demand.
3
Quotation & Planning
System design, brand recommendation and detailed price quotation are prepared.
4
Installation
Our certified team carries out the installation. Average duration: 2–4 days.
5
Commissioning
The system is optimized, parameters are adjusted and the user is instructed.
6
Handover & Warranty
2-year workmanship warranty, technical documentation and ongoing technical support.
Real Results from Real Projects
Selected heat pump installations we have recently completed.
Vaillant Installation 1 Vaillant Installation 2 Vaillant Installation 3 Vaillant Installation 4 Vaillant Installation 5
VAILLANT Plus
 FULDA · 2-STOREY APARTMENT BUILDING · 327 m²
Vaillant aroTHERM Plus 12.2 kW
- Complete System Installation
NEW BUILDINGVaillant aroTHERM Plus 12,2kW
7 days
Installation time
%27
Estimated energy savings
12,2 kW
System capacity
2 years
Workmanship warranty
Underfloor heating integration
Buffer tank + hot water cylinder installation
Complete technical documentation
F-Gas certified installation
Lambda Installation 1 Lambda Installation 2 Lambda Installation 3
Lambda Eureka EU08L
 LINZ · DETACHED HOUSE · 180 m²
LAMBDA Eureka EU08L
- Complete Mechanical Room Conversion
CONVERSION FROM PELLET BOILER SYSTEMLambda EU08L Air-Source Heat Pump
8 days
Installation time
%34
Estimated energy savings
10 kW
System capacity
2 years
Workmanship warranty
The old boiler infrastructure and mechanical room were completely rebuilt
Domestic hot water, underfloor heating and hydraulic balancing were optimized
Remote access was activated with Lambda Smart Control
Vaillant Installation 1 Vaillant Installation 2 Vaillant Installation 3 Vaillant Installation 5
VAILLANT Split
 HÜNFELD · 2-STOREY APARTMENT BUILDING · 120 m²
aroTHERM Split
- Complete System Installation
NEW BUILDINGaroTHERM Split
4 days
Installation time
%42
Estimated energy savings
6 kW
System capacity
2 years
Workmanship warranty
Underfloor heating integration
Buffer tank + hot water cylinder installation
Complete technical documentation
F-Gas certified installation
Vaillant Installation 1 Vaillant Installation 2 Vaillant Installation 3 Vaillant Installation 4
STIEBEL ELTRON
 MYŚLENICE · FAMILY HOUSE · 148 m²
STIEBEL ELTRON HPA-O 8 CS Plus
- Complete System Installation
CONVERSION FROM OIL BOILERSTIEBEL ELTRON
4 days
Installation time
%38
Estimated energy savings
8,5 kW
System capacity
2 years
Workmanship warranty
Full integration with the central heating system
hot water cylinder replacement and indoor unit installation
Complete technical documentation
Automation with MyStiebel mobile app
Vaillant Installation 1 Vaillant Installation 2 Vaillant Installation 3 Vaillant Installation 4 Vaillant Installation 5
LAMBDA Warmepompen
 POPRAD · 3-STOREY FAMILY APARTMENT BUILDING · 310 m²
LAMBDA Eureka EU15L
- Complete System Installation
CONVERSION FROM GAS BOILERLAMBDA Eureka EU15L
6 days
Installation time
%46
Estimated energy savings
16 kW
System capacity
2 years
Workmanship warranty
Integration with a mixed heating system
Buffer tank + domestic hot water electric heater installation
Complete technical documentation
Questions You May Have
We have compiled the questions our customers ask most often.
What does the heat pump price depend on?
House size, insulation condition, existing system and selected brand determine the cost. A final quotation is prepared after a free site survey.
How many days does installation take?
A standard detached house project is completed in 3–6 days. Removal of the existing system and additional equipment may affect the duration. The exact time is provided after the site survey.
Will the old boiler be removed?
It can be removed if needed. In some cases, keeping it as a temporary backup is recommended. Infrastructure is assessed for each project.
Is underfloor heating mandatory?
No. It also works with existing radiators, but the radiators must be adequately sized. If they are not sufficient, they must be replaced with suitable new radiators. The existing system is evaluated during the site survey.
Is there government support in Poland?
Yes, various support programs are available. The amount depends on income status and the system. We provide up-to-date information during the quotation stage.
Is maintenance required and how often?
An annual inspection is recommended. Filter cleaning and pressure check are sufficient for long service life.

Get a Free System Analysis
for Your Project

Share your address and we will prepare the suitable system and an approximate investment plan within 24 hours.